Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastron G400.A90.N - TPS - Elastron Kimya A.S.

Material Data Center offers the following functions for Elastron G400.A90.N:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Elastron G datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
模压收缩率, 平行 0.0183 mm/mm ASTM D 955
模压收缩率, TD 0.0156 mm/mm ASTM D 955
机械性能价值单位Test Standard
ASTM数据
断裂拉伸强度 11 MPa ASTM D 638
断裂伸长率 600 % ASTM D 638
100%伸长率时的模量 5.5 MPa ASTM D 412
300%伸长率时的模量 7.1 MPa ASTM D 412
邵氏硬度A 90 - ASTM D 2240
撕裂强度 70 kN/m ASTM D 624
压缩形变, 22小时 @ 73 °F 35 % ASTM D 395
压缩形变, 22 hr @ 158 °F 60 % ASTM D 395
其它性能价值单位Test Standard
密度 900 kg/m³ ASTM D 792
典型数据
加工方法
注塑
供货形式
自然色
特征
软质
耐化学试剂
通用耐化学性, 抗臭氧性
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.